Two units are in a exceptionally good conditions.
Working hours are HERE.
|Table size||mm||2 – 650 X 400|
|Max load||kg||2X 250|
|Pallet change time||sec||6|
|Max spindle speed||rpm||12 000|
|Spindle motor power (Siemens)||kW(SIemens)||6,6/ 4,1|
|Table to spindle distance||mm||200- 550|
|Rapid speed X/Y/Z||m/min||48/48/60|
|Working speed X/Y/Z||m/min||20|
|Diam . lead screw XYZ / pitch X,Y,Z||mm||32/ 16|
|Automatic tool quantity||pcs||14|
|Max. tool diameter||mm||Ø80/Ø100|
|Max tool length||mm||200|
|Max . tool weight||kg||2,8|
|Too change time (C-C)||sec||2,2|
|Machine tool size||mm||1 790х2 764|
|Machine tool weight||kg||4 500|
Column Moving Type
By using Dual Table, it is designed as column moving structure to be able to maximize productivity. Also, by extending column width, processing accuracy is increased and by designed as thermal symmetrical column structures, thermal deformation is minimized by heated.
The automatic index table is incorporated into the standard design of the machine on the i-CUT 380TD and 420TD. Both sides are completely separated by a heavy-duty guard. Because the table remains stationary during cutting, work can be safely set up on the table side not being machined on. The table itself rotates 180 degrees via a hydraulic rack & pinion gear and is locked in position using a locating pin.
i-CUT380TD/TDi is equipped with LM Guide of excellent speed and response. Therefore, non-cutting time is decreased,
which raises productivity by realizing rapid feed rate of 50/50/56 m/min.